20
EN
Scope of delivery
(changes reserved without prior notice)
1. WCI01 web app module, cap rail housing
20015364
2. Sauna bus cable 20015443
3. Installation and operation manual
Technical specifications
Power supply: 24 V DC (via EOS sauna bus)
Nominal power consumption: <1W
Ambient temperature range: - 20° to 40 °C
Attention: may not be installed in corrosive at-
mosphere or environment subject to moisture
condensation.
Connections:
1 x EOS sauna bus (RJ12 jack, 6P6C) -
siehe A
-
1 x 10/100 Base-T Ethernet RJ45 jack, shielded
-
siehe B-
Breakaway torque terminals: 0,22 - 0,25Nm
Required ports for the cloud connection: 80,
8080, 7250, 443
IP address distribution per DHCP, IPv4
Supported mobile devices: smartphones and
tablet PCs using an Android or Apple iOS op-
eration system.
In the CENELEC countries the system
may be only used in combination with
the suitable for the sauna heater safety
system as per norm DIN EN 60335-2-53,
like a fire protection safety rail.
EOS generally recommends the installa-
tion of the fire protection safety system
even if legally not required. Risk of fire by
remote start of the heater with a flam-
mable object forgotten on it!
Notice: only mobile devices using an
Android or an Apple iOS are currently
supported. The EOS Sauna Control web
app shall be installed on the mobile de-
vice.
For remote access and operation you
will require an internet access which
may inflict additional costs.
3
1
2
B
A
Overview of the available fire protection safety
rails for sauna heaters:
• Type 1 items. No. 94.4421
• Type 3 items. No. 94.4425
• Type 4 items. No. 94.4724
• Type 5 items. No. 94.4725
• Type 6 items. No. 94.5624
The WCI01 web app module is an optional ac-
cessory to the following sauna control units:
(stand 10/2014)
:
• Emotec series
(from Softwareversion V2.35)
• EmoStyle series / EmoStyle i series
• EmoTouch II + (sauna)
(from Softwareversion V3.30)
• EmoTouch 3 (sauna)
