21
EN
Installation
The module housing has a cap rail mounting
and if necessary may be mounted on the ap-
propriate rail either next to the sauna control
unit (recommended) or next to the internet ac-
cess point (e.g. router).
Connect the included sauna bus cable (RJ12
plug) to the free RJ12 jack in the sauna control
unit. Use a port switch by connection of sever-
al modules.
Make sure that the control unit
is disconnected from power prior to connec-
tion!
control LED
RJ45 jack for internet
connection
pairing button
orange
rot
grün/gelb
braun/schwarz
Now connect the module to your internet rout-
er using a standard patch cable with RJ45 plugs.
Switch on the power to the sauna control unit.
Within max. 5 minutes the cloud connection
LED on the module shall light on continuously.
The WCI01 web app module is now operation-
al.
On your mobile device (e.g. smartphone with
Android or Applie iOS) you need to install the
EOS Sauna Control app. The app is available as
a free download at the app stores of Google
and Apple. For futher details please refer to the
next chapter.
LED
active network
LED
cloud connection
micro SD card slot
cable connection sauna
bus to sauna control unit
Location of the sauna bus RJ12 jacks in the
main relay box (example shows the relay box of
the Emotec / Emotouch II+ models)
Connection of the sauna
bus cable to the module
Pic. 1
Pic. 2
Pic. 3
Pic. 4
F1
F2
JP5
}
}
}
I
II
plug connected
Saunabus
Module connection cable
Pic. 5
Pic. 6
plug connected
Sensorbus
only for sensor!
Sauna bus
Sensor bus
reserved
