6
GB
•
Caution! The unit may not be instal-
led in closed cabinets or in an enclo-
sed timber cladding!
• The electrical installation may only be per-
formed by an authorized electrician.
• You must comply with the regulations of
your utility company as well as the stan-
dard VDE-guidelines (DIN VDE 0100).
•
Caution! Danger of life: Never per-
form repair work and installations
yourself. The housing cover may only be
removed by a specialist.
• It is mandatory to follow the initiatives listed
in the installation instructions, in particular
when installing the temperature sensor.
The temperatures above the heater are
decisive for setting the temperature. The
temperature limit values are maintained
only when correctly installed and ensure
very little temperature fl uctuation in the
bench area of the sauna cabin.
• The unit may only be used for the intended
purpose to control sauna heaters up to 9
kW (in combination with power switchgear
up to 36 kW).
• The system must be unplugged from the
network before repair work or installations
are performed, e.g. disconnect fuses or
master switch.
• Follow the safety and installation informa-
tion provided by the sauna manufacturer.
• Follow the information and instructions
provided by the cabin manufacturer as
well.
• Only use light bulbs for the cabin lighting.
Never use fl uorescent lamps, low-energy
light bulbs or gas discharge lamps.
• In badly ventilated rooms a fan may be
used additionally to remove the used up
humid air.
General Safety Regulations
Caution!
Dear customer,
In compliance with the valid regulations,
the electrical connection of the sauna he-
ater as well as the sauna control may only
be performed by a certifi ed electrician.
Therefore, this information is provided to
you in case a copy of the invoice from the
certifi ed electrician must be presented for
warranty claims.
Always
make
sure
that
the sauna heater is free from ob-
jects. Fire hazard!
When using control units that offer the
possibility of external access (GSM-module,
remote button, etc.) or time-delayed swit-
ching (preselection time, weekly timer, or
similar) a trigger guard with covered heating
unit is required. (cover protection type 1-5 or
S-Guard).
