20
GB
First, set the current time with
/
.
When confi rmed with
the display changes to the next screen.
Here you set the type of sauna heater that you wish to operate:
= sauna heater without vaporizer (Finnish operation)
= sauna heater with vaporizer (Finnish and climate operation)
The operation of a sauna heater is factory set with vaporizer, identifi ed with the green border
around the symbol.
If you wish to operate a sauna heater without vaporizer, touch the
button and the symbol
is framed in red.
Then save the entry with
. The red border changes to green.
You have now completed the basic settings.
Setting the time may be changed by the end consumer at a later time.
Changing the setting of the type of sauna heater is a job for the installer.
The EOS-logo briefl y appears and the unit switches to standby mode.
The enclosed operating instructions (Print No. 29343840) show you how to operate the unit.
In addition to the “additional settings” described in the operating instructions, you as installer
have additional options that should not be changed during the operation.
These settings can only be called up after entering the code number.
There is a differentiation between 2 types of settings here.
• Operator menu
(settings are performed by a janitor, pool staff etc.)
• Technology menu
(settings should be kept for a service technician)
Any changes made here may lead to faults or malfunction of the control; therefore do not
hand these instructions (and especially the code numbers) to the end user of the system.
