8
GB
Using the
and
buttons, you can
now set the correct time.
Switching on the control unit for the first time
After making a final check on all the connections – ensure that the control unit switch
is set to I – connect the unit to the mains by switching on the fuses or the main switch.
After switching on the time flashes.
To save the time, press the „MODE“
button and hold it down until the time is
permanently displayed
Using the sauna
3.1 Finnish sauna operation
Press the
button to switch on the
sauna heater. The display alternately
shows the current time and the set
temperature (factory setting 95° C). The
green operating LED comes on and
as long as the sauna heater is on, the
red heating LED is also displayed.
95°
15:00
15:00
15:00
12:00
At expiration of the heating time delimitation the plant switches off automatically. If you
want to switch the plant off manually, press the - button. When switching off the
control reacts mode of operation-dependently.
Switch off the sauna
Finnish operation
The plant is switched off. In the
announcement the current time appears
15:00
