9
OSD SETUP
Exit
RDS on/off optional
Stunde
Minute
Car backsight left/right
image selection
Links
Rechts
Radio frequency setting
Time
setting
Note:When you touch each button,there
is blue background and yellow words on
the screen
Note:There are 3 buttons automatically changed according to your setting change in radio
state when you activate or exit RDS,Changes are as following:
PTY
LOUD, TA
EQ, AF
ST.
TIME DISPLAY AND ADJUST
Time display: Touch main menu into adjust mode, press time setup button, the
corresponding function will be display in yellow words.
(1)Press ”+” on hour to add hour, press “-” to reduce hour;
(2)Press ”+” on minute to add minute, press “-” to reduce minute.
NOTE:
Touch the correspondence function, will be display in green background.
The unit include two times system: Europe time (24 hour setup), America time (12
hour setup), when show the AM mark it indicate morning time, when appear the PM
mark, it show the time of afternoon.
Remark:This unit is with RDS function, it will automatically adjust the time when you
activate RDS function of have received RDS radio channels.
At no received RDS radio
channels or AM state,you should adjust the time.
40
TV
Touch TV mode of the menu or press SOURCE button on remote control to switch to
TV mode, auto scan and store channels.
Press AMS/RPT button on remote control or SCAN touch button on display to auto
scan TV channels. The range of scan if full TV channel. The channels will auto store into
number button in sequence.
1.
Switch channel
1) Press SEEK
+
/ SEEK
-
button on panel or SEEK
+
/ SEEK
-
on remote control or
/
touch button on display, unit will skip to previous or next stored channel.
2) Press number button on remote control, unit will skip to appointed channel, for
example, press 6 button, unit will skip to 6 channel. Press 10+, “_ _” will appear on left
top corner of display, press number button 3,9, unit will skip to 39 channel.
2.Manual tuning TV channel
1)
Press and hold SEEK + button on panel, SEEK + button on remote control, or
touch button on display to scan TV channel in increase direction.
2)
Press and hold SEEK - button on panel, SEEK - button on remote control, or
touch button on display to scan TV channel in descending direction.
3.TV sound system switch
Press the AUDI button on the touch screen to switch TV sound system. The sequence is
as follows:
PAL I→PAL DK →PAL BG →PAL I
4.Blue screen
The display will be blue when there is no signal.
Summary of Contents for E1015
Page 2: ......
