10
Prompt!
•
Some measuring range may exist interference, it’s normal that the reading can’t return zero or will float
slightly when active the REL measuring pattern.
•
Please remember to relieve the REL measuring pattern after finished the measurement.
Measuring data hold and storage
Both holding and storing measuring data are completed with one key. The displaying reading will be stored once
pressing the key of “storage”, and the LCD screen will display the data storage icon “H00-H99” at the same time. It will return
to normal running if you press the key again, anyway, the holding data has been stored in the internal storage.
1. If you need to load the current measured value into the database, please press the “Storage” key to keep it down.
2. Once the data being stored, press the “waveform/readout” key and stay for 2 second to enter the database, you can check
the stored data.
3. Once the meter gets into data holding state, it can only display the stored data when press the “waveform/readout” key,
and it’s unable to get into waveform state at this time.
4. Holding state will be existed automatically when changing measuring range or measuring function.
Measuring data readout and delete
Measuring data readout:
The database of this meter is equipped with the capacity of storing 100 DMM measuring data.
1. Press the “waveform/readout” key and stay at least 2 second to enter the database of the meter.
2. In the state of “data readout”, the bottom screen of the meter will appear a window (window of the real-time measuring
data) and the data will be renovated all the time.
Summary of Contents for ET201
Page 1: ...ET201 User s Manual ...