AC 9V
5
6
Function Buttons
Description
Flash or Recall
To switch between 2 lines
This button functions as “Last Number Redial” when you make a call (32
digits maximum). Numbers that are longer than 32 digits will not keep in
the redial memory.
This button functions as “Pause” when programming a telephone number
into the phone book. It is mainly used when storing a prefix in the one- or
two-touch memory. Press (REDIAL/P) button where the pause is needed
and complete the storing process as described in “
Two-Touch Memory
”.
To put your phone off-hook for on-hook dialling. To switch back, simply
pick up the handset and speak as normal.
To select ringer level (Off/Low/High)
When a headset (purchased separately) is connected to the headset jack,
conversation can be made via a headset.
GB
English
(RECALL/FLASH)
(REDIAL/P)
(SPEAKER)
Congratulations on your purchase of this DESIGNER’S PHONE. This telephone has been designed
by renowned Danish designers with considerations to form and function.
This telephone performs all basic functions supported by your network providers. It works with most
PABX switching system (please consult your switching system provider for details).
In addition, the built-in caller ID decoder, the phone book, the redial list and the caller ID memory
provide you with great convenience to manage your phone calls.
Instruction for Users
Refer to the
Main Diagram
section and:
1. Connect the coil cord to the jack on the base unit.
2. Install batteries:-
i) Remove the battery compartment door by pressing a pen into the hole between the two screws.
ii) Insert 4 fresh AAA size batteries by observing the +/– polarity marks in the battery compartment.
iii) Replace the battery compartment cover securely.
3. Connect one end of the line cord to the jack on the base unit, and the other end to the wall outlet
for telephone.
4. Connect the adaptor jack to the phone and then connect the adaptor to the wall socket. It is essential
to power this designer’s phone with a 9V 300mA adaptor to support the LCD display operation.
Installation
1
Note :
Plug types vary according to different countries.
Optional accessory (purchase separately, not provided with the package).
1
2
R
To set time, date and LCD contrast (HI/LO) for the unit.
To adjust the speaker volume
One-Touch memory (18 digits maximum). Push one of these keys to make
a call to one of the stored telephone numbers. Please refer to instruction
for users, section “
One-Touch Memory
”.
M1 – M3
To scroll up/down when browsing selections, and to move the cursor to
left/right when editing a record.
To delete an entry or a record in the memory.
(DELETE)
Phone book function has up to 70 memory locations in the Phone Book
memory. For details, please see “
Phone Book
” section in this user manual.
Telephone Line Jack for line cord plug in.
2
(optional)
(PHONE BOOK)
(SET)
