Operating Manual
Operation
30.03.2020 Version 1.0
©2020 enz® technik ag
Page
27
of
36
Replacing nozzle inserts
The nozzle inserts in every spray gun can be easily changed. To do so, go through the
following steps.
1.
Remove the plastic cover with a Phillips-head screwdriver.
(Only the SG-44 spray gun).
2.
Remove the nozzle with the appropriate socket wrench.
3.
Remove any adhesive residue from the thread.
4.
Coat the thread of the nozzle to be inserted with some Loctite 243.
5.
Screw the nozzle in as far as it will go, then use a socket wrench to slightly
tighten it (hand-tight).
6.
Mount the plastic cover with a Phillips-head screwdriver.
(Only the SG-44 spray gun).
Figure 14: Removing/mounting the plastic cover
Figure 15: Replacing nozzle inserts
Socket
