Operation
Operating instructions
Page
22
of
28
©2021 enz® technik ag
Date 15.03.2021 Version 1.3
Figure 7: Charging the Enz® Camera
5.1.1
Procedure
1.
Connect the Enz® Charging station to a power source using the supplied cable
2.
Place the Enz® Camera with the back side on the Enz® Charging station.
ATTENTION!
Damage to the Enz® Charging station caused by dirt and moisture!
The Enz® Charging station is not protected against dust and
moisture. For this reason, always clean and dry the Enz® Cam-
era before charging.
The orange status LED lights up, the charging process runs.
When the blue status LED illuminates, the charging process has finished and
the rechargeable battery is fully charged.
