Information on safety
Operating instructions
Page
12
of
28
©2021 enz® technik ag
Date 15.03.2021 Version 1.3
Depending on the activity, verification must be provided that the personnel have the
following knowledge:
Person
Qualification
Operating person-
nel
Training by the operating company
Knowledge of usual technical procedures of sewer and
waste water cleaning.
Service and
maintenance per-
sonnel
Training by the operating company
Recognised professional-specific technical education
(e.g. electronic professional education)
Knowledge of the relevant standards and provisions
Table 4: Qualifications of the personnel
2.4.1
Rules and occupational safety
The local legislations as well as safety and accident prevention regulations apply
for the operation of the product.
Before putting into operation each time, all safety and protective equipment
must be checked.
Each working method which impairs safety must be avoided.
During operation, only authorised personnel may remain in the operating area.
All maintenance and repair work must only be carried out when the product is
switched off and has cooled down. Before starting this work, the product must
be secured against being switched on unintentionally.
The operating company is responsible for the adherence and monitoring of the
safety measures.
2.4.2
General obligation for inspection and maintenance
All notes for inspection and maintenance contained in these operating instructions
must be observed.
2.4.3
Modifications
Modifications on the product with regard to attachments and conversions, use of non-
original spare parts as well as software changes are prohibited.
2.4.4
Power supply
The connection values and tolerances for power supply as well as the power consump-
tion specified are binding for the power connection (see chapter
3 Technical data
).
2.4.5
Spare parts
To ensure safe operation, only spare parts specified by the manufacturer may be used.
Otherwise all guarantee and liability claims against the manufacturer become void.
