Operating instructions
Information on safety
Date 15.03.2021 Version 1.3
©2021 enz® technik ag
Page
15
of
28
2.5.3
Responsibilities of the service / maintenance personnel
The service / maintenance personnel have the following responsibilities:
To read and understand the operating instructions
Observe the fundamental regulations on occupational safety and accident pre-
vention
Correct maintenance and repairs of the product
Check that during maintenance and repair work, no unauthorised persons re-
main at the product
Use and maintenance of the necessary protective equipment
Cleanliness and clear arrangement in the vicinity of the product
General safety instructions
The general safety instructions in this chapter inform you about potential dangers
which, despite correct use of the product, may be result or occur unexpectedly.
To avoid personal injury, property or environmental damage, it is essential that all per-
sons working on product observe the safety instructions. For these persons, it is there-
fore is particularly important that this chapter is read and understood.
2.6.2
Section-related safety instructions
The section-related safety instructions apply for the entire area of activity (e.g. opera-
tion, maintenance, etc.) and are listed at the beginning of each chapter.
2.6.3
Embedded safety instructions
The embedded safety instructions apply for certain situations within a handling in-
struction and are therefore listed at the relevant position affected.
2.6.4
Statutory safety instructions
The statutory regulations for accident prevention and environmental protection appli-
cable at the operating location must be observed, as well as the recognised technical
rules for safe and professional work.
2.6.5
Consequences when disregarding the safety instructions
Disregarding the safety instructions may lead to accidents with serious personal injury,
property or environmental damage.
