3) Assembly Overview
INSTALLATION GUIDE
Figure #7
Figure #8
Figure #9
8. Attach the Turnbuckle Rods to the
Top Plates of the legs using ¼-20
x ½” Hex Drive Flat Head Bolts.
You may need to thread or
unthread the turnbuckle to adjust
the rod length so that the holes
will line up. (Figure #7)
9. Once both the Turnbuckle rods
are attached to the top plates,
tighten the turnbuckles a half turn.
(Figure #8)
10.Being careful not to damage the
Table Top edges, flip the table
right side up and place all four
feet on the ground. Be careful not
to place too much weight on the
wooden legs while flipping the
table. (Figure #9)
11. Move the table to the desired
location and level the table by
screwing the leveling glides in or
out.
