3) Assembly Overview
INSTALLATION GUIDE
Figure #1
Figure #2
Figure #3
1. Lay the Table Surface upside down
on a soft, clean, and level surface
to avoid damage. Place both legs
on top of it, but do not attach
them yet. (Figure #1)
2. Your assembly may include a
Center Rail with Turnbuckles, or a
Foot Rail pair, or both. The Center
Rail and Turnbuckle must be
placed in the center. The Foot Rail
pair can be installed where
desired.
To install these you will need to
remove the placeholder hardware
(¼-20 x ½” Hex Drive Flat Head
Bolts and ¼-20 Hex Nuts) filling
the holes in the Leg Kit Rail.
(Figure #2)
3. If you have a Center Rail with
Turnbuckles, place it upside down
so that the holes at both ends of
the rails line up with the holes in
center of the Leg Rails. Attach
these using the ¼-20 x ½” Hex
Drive Flat Head Bolts. (Figure #3)
