ENVO LYNX-20 FOLDING EBIKE EASY INSTALLATION GUIDE
|
VERSION 1.0
4
6. P E DA L I N S TA L L AT I O N
•
Take the pedals out of the small box
•
Apply a small amount of grease to the screw portion of the pedal
Figure 6A
• Look for the letters displayed on the head of the screw and/or bottom of the pedals
Figure 6B
•
“L” indicates left and “R” indicates right.
•
Tighten the pedals using a size 15mm wrench.
•
The right pedal tightens in a clockwise motion
•
The left pedal tightens in a counterclockwise motion.
Figure 6B
Figure 6A
7. S A D D L E I N S TA L L AT I O N
• Use a 6mm Allen key to loosen up the bolt in
Figure 7A
•
Swivel to top piece to 90 degrees so that you can place the saddle
• Place the clamp as shown in the
Figure 7B
and tighten it.
Figure 7B
Figure 7A
