ENVO LYNX-20 FOLDING EBIKE EASY INSTALLATION GUIDE
|
VERSION 1.0
3
Figure 5A
Figure 5B
Figure 5C
•
The longer fender stay must be connected to the shorter end of the fender
•
The shorter fender stay must be connected the longer end of the fender
•
Make sure the stay is evenly placed on the fender
•
Align the longer fender stay and secure it in place
•
The shorter stay will have the rack stay placed over top so the rack must be installed before
screwing it in place
Figure 5C
Figure 5E
Figure 5D
Figure 5F
5.2 . R AC KS
Front Rack
•
Max payload 22 lb / 10 kg
• Front rack is secured onto the front of the head tube headtube with 2 screws
•
Make sure the screws are securely fastened and the rack is not loose
Rear Rack
•
Max payload 44 lbs / 20 kg
•
First install the rack by aligning the screw holes
Figure 5D
• For the front side of the rack, screw in the screws from the inside
Figure 5E
•
For the back side, align with the rear fender stay and screw in from the outside
Figure 5F
•
Make sure it is firmly secured on the bike
