Voor Nederlandstalige ondersteuning neemt u contact op met Teknihall support: 0900 400 2001
De gesprekskosten bedragen 0,18 €/minuut
11
[email protected] / www.teknihall.nl.
PO1313
2.
Please make sure to take away the plastic battery protection before you start using the
remote control.
3.
Point the remote control towards the IR receiver point on the player:
4.
Press the ‘PLAY/PAUSE’ button to play music and press it again to pause.
5.
Press ‘CH+’ or ‘CH-‘ to adjust the frequency of the player.
6.
Press ‘VOL+’ or ‘VOL-‘ to adjust the volume.
7.
Press ‘PRE’ or ‘NEXT’ to choose the previous or next song.
8.
Press a number key to choose a song in the current folder (eg. Song number 2: Press “0002”
then press ‘PICK SONG’).
9.
Press the ‘EQ’ button to shift among different EQ modes.
10.
Press a number key to choose an broadcasting channel eg. 88.6: Press “0886”, then press
“CH SET”. For 106.2: Press “1062” then “CH SET”.
NOTE: The remote control will not work when you connect external audio devices with the car
MP3 player via audio port. But you can still use it to adjust the channel.
11.
If there is no response by pressing the remote control please change the battery like below:
a
．
Take out the battery slot
b
．
Remove the battery
c
．
Insert a new battery with correct polarization (+/-)
d
．
Put the battery slot back
IR Receiver point
