___________________________________________________________
WARNING
Never place any part of your body under a suspended load or move a
suspended load over any part of another person's body. Before
lifting, be certain that you have a safe location for depositing the
load. Never work on a component while it is hanging from a crane or
other lifting mechanism. Failure to follow this precaution may result
in severe bodily injury or death.
___________________________________________________________
Always inspect slings, chains, hoists and other lifting devices prior to use. Do not use
lifting devices, which are defective or questionable. Never use lifting devices, which
have been painted as the paint, can hide stress or fatigue cracks.
Never exceed the safety rated capacity of cranes, eyebolts, hoists, slings or other lifting
equipment. Follow standards and instructions applicable to any lifting equipment used.
SETUP AND OPERATION SAFETY
Do not set up or operate any machine until you read and understand all safety
instructions.
Assign only qualified, fully trained personnel, instructed in safety and all machine
functions, to operate any equipment.
Operators must carefully read, understand and fully comply with all machine-mounted
warning and instruction plates. Do not paint over, alter or deface these plates. Replace
all plates, which become illegible
Do not operate machinery with safety guards, shields, barriers, covers or other
protective devices disconnected, removed or out of place. Interlocks are provided for
various units. Do not remove or bypass them.
Never lean on a machine or reach over or through a machine. You may become caught
between moving elements or you may accidentally activate start buttons or
similar devices.
Be attentive during operation. Excessive vibration, unusual sounds, etc. can indicate
problems requiring your immediate attention.
System power must be off if the equipment is left unattended. Shut off power to a
machine when you leave the operating area or at the end of your work period. Never
leave the machine running unattended. Make sure system power is off before cleaning
