Enviro Westport Steel, Owner'S Manual

Page: 12 / 48

12
Figure 6: Handles for Removing Door.
Figure 7: Removal of Door and Fascia�
Maintenance And Service
To Replace:
• Open door, and remove the glass carefully.
• Install the new piece of glass with the large bulb in the gasket tape against the unit. Place the joint
in the tape in a bottom corner. Close door.
g
Lass
D
ooR anD
F
ascia
R
emovaL
:
b
uRneR
R
emovaL
:
1. Remove the door and fascia as shown in the M
aIntenance and
s
ervIce
- G
lass
d
oor and
F
ascIa
r
eMoval
.
2. Carefully remove the log set and ember material.
3. Remove the two (2) screws (located on the outside edges of the burner) that hold the burner to the
chassis inside the fire box, see Figure 8. Remove the burner tray from the firebox.
Turn unit off and wait until the appliance has cooled
down. Remove the stovetop from the unit by lifting
straight up. Lift the two door handles located
on either side of the door and lift the glass door
assembly straight up and out (see Figure 6 and
Figure 7). To remove the door fascia lift up and then
away from the stove (Figure 7).
Ensure the door is properly fastened after cleaning
before attempting to re-light the appliance.