9
Operating Instructions
For Your Safety, Read Safety Precautions And
Lighting Instructions Before Operating
NOTE:
Check that all burner holes are lit.
TO TURN GAS FIREPLACE OFF
Flip the burner switch to OFF to turn off burner only.
If the fireplace is to be turned off for the season or for servicing, turn control knob to OFF, turn the gas
shut off valve to OFF. DO NOT FORCE IT. If the unit is going to be serviced, turn off the electrical power
to the unit as well.
NOTE:
When the unit is turned on for the first time, it should be turned onto high, with the fan OFF, for
the first four (4) hours.
This will cure the paint, logs, gasket material, and other products used in the
manufacturing process. It is advised that a door or window be opened as the unit will start to smoke,
which can irritate some people. After the unit has gone through the first burn, turn the unit OFF, including
the pilot, and let the unit completely cool. Then remove the glass and clean it with a good gas fireplace
glass cleaner, available at your local Enviro dealer. See
M
aIntenance
a
nd
s
ervIce
- c
leanIng
t
he
g
lass
and
M
aIntenance
a
nd
s
ervIce
- g
lass
d
oor
r
eMoval
.
n
oRmaL
s
ounDs
D
uRing
o
PeRation
:
Table 2: Normal Sounds
Component
Sound & Reason
Westport
Creaking when heating up or cooling down.
Burner
Light pop or poof when turned off; this is more common with LP units.
Temperature Sensor
Clinking when it senses to turn the blower on or off.
Pilot Flame
Quiet whisper while the pilot flame in on.
Blower / Fan
Air movement that increase and decreases with the speed of the blower. The
blower is pushing the heat from the fireplace into the room.
Gas Control Valve
Dull click when turning on or off, this is the valve opening and closing.
Summary of Contents for Westport IPI Steel
Page 50: ...Notes 50...
