Page 41
Secondary Installation
f
iRe
g
Rate
anD
L
og
s
et
i
nstaLLation
-
continueD
STEP 5
Break up the ember wool as fine as possible (clump
the wool together and separate it using the supplied
brush) over the burner tube. It is best to have less
ember wool - keep it light and fluffy. Lightly sprinkle
strands of Embaglow overtop of the wool. Place coals
on the air deflector in front of both mid logs as show.
Do Not
cover the gaps between the burner and air
deflector.
STEP 6
Place Centre Top Crossover Log #8 at an angle on top
of the Rear Log #10 and Left Mid Log #5 pins.
STEP 7
Rest Centre Top Log #2 on top of Left Mid Log #5,
making sure to align the bottom with the grate arm.
STEP 8
Place Center Front Chunk Log #3 on the log grate,
close to the centre, with the front edge resting on
Right Mid Log #6.
STEP 9
Place Right Front Chunk Log #4 between the grate
arms on the right, with the notch resting on the log
grate and the front resting on the burner.
DO NOT COVER ANY BURNER PORTS
STEP 10
Place Left Front Chunk Log #1 between the grate arms
under Left Top Log #7, with the front resting on the
burner.
