41
Secondary Installation
f
iRe
g
Rate
anD
L
og
s
et
i
nstaLLation
:
The placement of the logs is not arbitrary. If they are positioned incorrectly, the fl ames can be “pinched”
and will not burn correctly. All of the logs come with either a notch or ledge, which make alignment easier.
Using the pictures provided, carefully set the logs in place (see Figures 50 through 56).
NOTE: The logs are fragile and should be handled gently.
Figure 50. Empty fi rebox with grate and locator pins.
Figure 51. Back Log and Ember Bed Installation.
Figure 52. Coal Nuggets Installation.
Step 1
: Place the back log on the top
legde of the air duffuser with back up
against the rear brick panel. Install the
ember bed assembly into the fi rebox as
shown, making sure the ember bed is
up against the front lip of the fi rebox air
diffuser (Figure 51)
Step 2
: Fill in the bottom of the fi rebox using
the coal nuggets supplied with the unit as
shown in Figure 52.
Figure 50: This is how the
fi rebox looks with only the
burner, air diffuser, log grate
and brick panels in place. The
log grate can be easily removed
by simply lifting up off the
locating screws.
