7
A
DETAIL A
SCALE 1 : 4
15. Re-install other hinge and lid. Hinge mounting holes have been shifted vertically up on the back
plate. Slide lid pivot in to previously mounted hinge. Next slide other hinge on to opposite lid pivot
and secure the hinge. Open and close lid a few times to check that lid is pivoting properly.
16. Re-attach the cabinet sides then the lock collar and adjustment knob. The opposite of steps 1 & 2.
17. Attach 4” diameter 20-24 gauge galvanized or aluminum ducting to outlets on HDK. Ducts should
slide through holes in the back plate and on to outlet tubes.
18. Install ducting according to clearnaces stated in the warning section as well as the building and fi re
code in your local area.
Figure 17: Lid and hinge install.
Figure 15: Cabinet side extension install.
Figure 16: Hinge & Cabinet side extension fastener install.
14. Attach Cab Extensions to back plate using two #8 sheet metal screws on each side. Mount one
hinge using #8 T-20 screws.
Summary of Contents for Maxx-1
Page 10: ...10 Wiring Diagram...
