25
Initial Installation
QUALIFIED INSTALLERS ONLY
Option 3: Bezel -
A bezel may be desired to accentuate the CSS outlet. Construct the framing in a way
that provides a 48” (1219mm) by 3” (76mm) cutout to mount the bezel. The top of the cutout must be
1 1/2” from the top of the chase. It is essential that these dimensions are followed and not to deviated
from them when using combustible materials inside the chase (see Figure 34).
Note: If you wish to construct a similar cutout part way up a tall wall then it is essential to build a false
ceiling inside the chase at the desired height to direct the rising heat out of the gap.
Figure 34: Framing Option 3
Optional Accessory: False Ceiling -
Your desired framing option may require a false ceiling to capture
and evacuate the heat out of the gap (see Figure 35).
10"
255mm
Minimum
0 to 1 12 "
38mm
Maximum
3 18 "
79mm
CSS Bezel
Included
With Unit
10"
255mm
Minimum
3"
76mm
Minimum
False Ceiling
Figure 35: False Ceiling
Summary of Contents for G42L
Page 54: ...54 Parts Diagram 7 8 9 10 11 12 13 14 15 6 16 5 4 3 2 1...
Page 55: ...55 Notes...
