*Min. 3’
**Max. 7’
*Minimum vertical height is mea-
sured from the top of the unit to
the intake collar center line
** Maximum vertical height is
measured from the top of the
unit to the exhaust collar center
line. 5’ maximum for Q1 installs.
Note: The intake
collar is closer to
the rear of the
fireplace for the
Q1.
C-15600
Initial Installation
QUALIFIED INSTALLERS ONLY
Figure 3: Venting Minimum and Maximum
Step 8:
Attach the venting to the top of the fireplace using 3 screws per vent. Making sure the intake is on
the intake collar. The intake collar is on the left side of the fireplace for the Q1 and is indicated on the
flue collar of the E series units by the “IN”.
Step 9:
Proceed with regular installation for the given model as shown in the owner’s manual.