background image

29

Warranty

Sherwood  Industries  Ltd.  is  the  manufacturer  of  the  Enviro  line  of  heating  products.  At  Sherwood 

Industries, our commitment to the highest level of quality and customer service is the most important 

thing we do. Each Enviro stove is built on a tradition of using only the finest materials and is backed by 

our Exclusive Lifetime Limited Warranty to the original purchaser. With Enviro, you’re not just buying a 

stove, you’re buying a company with years of unequalled performance and quality.

Limited Lifetime Warranty:

Under this warranty, Sherwood Industries Ltd. covers the stove body and accessories against defects 

in materials and workmanship, for part repair or replacement for the first seven (7) years and limited 

labour for the first two (2) years to the original purchaser. This Warranty covers: Firebox, Stainless Steel 

Secondary  Air  Tubes,  Cabinet  Sides,  C-Cast  Ceramic  Baffle  Baffle,  Surround  Panels,  Pedestals,  Legs, 

Ceramic Glass, Slider Control and Cast Iron Door Assembly against defects. Please see the exclusions and 

limitation section below as certain restrictions and exclusions apply to this warranty. 

Limited Two (2) Year Warranty:

Under  this  warranty,  Sherwood  Industries  Ltd.  covers  all  electrical  components  against  defects  in 

materials and workmanship, for part repair or replacement for the first two (2) years and limited labour 

for the first two (2) years to the original purchaser. Please see the exclusions and limitation section below 

as certain restrictions and exclusions apply to this warranty.

Limited One (1) Year Warranty:

Under  this  warranty,  Sherwood  Industries  Ltd.  covers  all  exterior  surface  finishes  against  defects  in 

materials and workmanship, for part repair or replacement and limited labour for the first year to the 

original  purchaser.  Please  see  the  exclusions  and  limitation  section  below  as  certain  restrictions  and 

exclusions apply to this warranty.

How the Warranty Works

1. All warranties by the manufacturer are set herein and no claim shall be made against the manufacturer 

on any oral warranty or representation. All claims under this Limited Warranty must be made in writing 

by your dealer.

2.  Any  stove  or  part  thereof  that  is  repaired  or  replaced  during  the  Limited  Warranty  period  will  be 

warranted under the terms of the Limited Warranty for a period not exceeding the remaining term of 

the original Limited Warranty or six (6) months, whichever is longer.

3.  For  any  part  or  parts  of  this  stove,  which  in  our  judgment  show  evidence  of  defects,  Sherwood 

Industries Ltd. reserves the option to repair or to replace the defective product through an accredited 

distributor or agent, provided the defective part is returned to the distributor or agent, transportation 

prepaid, if requested. Sherwood Industries Ltd. may chose to buy back the item at the cost the dealer 

was invoiced.

4. If you discover a problem that you think may be covered by the Limited Warranty, you MUST REPORT 

it to your Enviro dealer WITHIN 30 DAYS, giving them proof of purchase and the date of purchase. 

The dealer will investigate the problem and work with Sherwood Industries Ltd. to determine whether 

the problem:

a) Is covered by the Limited Warranty or 

b) Can be fixed in your home or does the product need to be returned to Sherwood Industries Ltd. 

for repair.

5. If Sherwood Industries Ltd. determines that the stove needs to be returned to Sherwood Industries 

Ltd. for repair, the customer has the responsibility and the expense of removing it from their home 

and shipping it to Sherwood Industries Ltd. If the problem is covered by the Warranty, Sherwood 

Industries Ltd. will replace the item at their discretion and the customer will be responsible for return 

shipping and re-installation in their home. 

Summary of Contents for 1200-V Insert

































Reviews: