Pixel Triton User Manual
Part No.: 51322
For latest version visit:
www.enttec.com
25 October 2018
mfile ID: 4815381
Page|
3
Wiring Diagram
•
Always check that the voltage and output of Pixel Triton matches that of the tape/dots, before connecting.
•
Network delay: 96 micro seconds per unit, for a standard 600 bytes Art-Net packet (when connected in network
daisy chain)
•
Only one ethernet source must be used to drive the device at any single time.
•
Ensure distance between Triton data output and tape/dot data input is not more than 50 cm
•
Through connection can be made with any of the three models Pixel Port, Pixel Octo or Pixel Triton
Output 3-Pin Female XLR Pinout
Not to be used as DMX output
Pin 1
Ground
Pin 2
Data
Pin 3
12V Triton
+12 VDC
24V Triton
+24 VDC
Do not connect the Positive voltage of output 1 (VCC 1) to positive voltage of output 2 (VCC 2)
