User Manual
Pixel Port
For the latest version visit:
www.enttec.com
21 September 2017
ID: 3617472
P a g e
|
1
Package Contents
•
Pixel Port (76302-16, 76302-26 or 76302-55)
•
Pixel Output Connector (76301)
•
2m cat5 cable (79102)
•
1RU Mount kit (79105)
•
This user manual
Safety Information
•
This unit is intended for indoor use only.
•
Do not expose this device to rain or moisture,
doing this will void the warranty.
•
Make all the connections before you plug in
the mains power
•
Do not remove the cover, there are no user
serviceable components inside.
•
Never plug this unit in to a dimmer pack
•
Ensure proper earth connections
•
Always be sure to mount this unit in an area
that will allow proper ventilation. Allow
about 6” (20 cm) between this device and a
wall.
•
Power-supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, pay particular attention to the point
they enter and exit the unit.
LED Protocols Supported
•
9PDOT-8bit
•
9PDOT-16bit
•
WS2811, WS2812, WS2812B, WS2813
•
SK6812
•
TM1804
•
TM1812
•
APA-104 LEDs
Note:
We cannot claim to support all led protocols, but if you do
happen to find one that does work, and is not listed, please
let us know, so we can update our documentation
Dimensions
Note
All dimensions are in millimetres (mm)
