User Manual
Pixel Port
For the latest version visit:
www.enttec.com
21 September 2017
ID: 3617472
P a g e
|
10
Standalone (Default Mode)
The Pixel Port comes loaded with 14 factory preset
shows. Out of box the default preset show is:
•
7-coloured rainbow wave travelling forward
•
WS2811, WS2812, WS2812B LED protocol
•
Capable of driving 340 RGB pixels
The preset show set will run and loop every time you
power the unit up.
The playback sequence will stop
only when, another personality is selected, or
another preset is activated.
If you do not want the Pixel Port to generate any
output when powered up, simply change the
personality to Direct mode.
When the Pixel Port is restored,
the first 14 presets will
always be reset to factory default .
Notes:
•
Select correct LED protocol
•
Select correct pixel order
Direct Personality
In this mode, you are able to send DMX over Ethernet
to Pixel Port using the following protocols:
•
Art-Net
•
sACN
•
ESP
The following are available as output LED output
protocols:
•
9PDOT-8bit
•
9PDOT-16bit
•
WS2811, WS2812, WS2812B, WS2813, SK6812
TM1804, TM1812
•
APA-104
Note:
We cannot claim to support all led protocols, but if you do
happen to find one that does work, and is not listed, please
let us know, so we can update our documentation
