DIN ETHERGATE (71030)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
8
|
ID: 5928465
Document Updated: August 2022
value is set on the output.
LTP Merge
: Latest Takes Precedence. The latest source received is used as the output.
Hardware features
Forward facing LED status indicator.
Electrically insulated ABS plastic housing.
Surface mount or TS35 DIN mount (using included DIN Clip accessory).
Two bi-directional DMX ports.
Inbuilt DMX termination.
IEEE 802.3af PoE (active PoE).
Link & Activity LED indicator built into RJ45 port.
2 Pin DC power input phoenix 12->24v.
Pluggable terminal blocks.
Phoenix Pinout
The DIN ETHERGATE features two 4 Pin Phoenix
Connectors, which can be used either for DMX in or DMX
out, depending on the settings set within the Web
Interface.
The Phoenix connectors feature the DMX standard ports
(0V, Data - and Data +), with an additional port called
Term which is used when the DIN ETHERGATE is being
used as a DMX to eDMX converter. The TERM port will
replace the need for the Data + port and will provide
termination to your DMX line.
PoE (Power over Ethernet)
The DIN ETHERGATE supports IEEE 802.3af Power over Ethernet. This allows the device to be powered via
the RJ45 EtherCon Connection, reducing the number of cables and the ability to remotely deploy the DIN
ETHERGATE without the need for a local power source close to the device.
PoE can be introduced to the Ethernet cable, either through a network switch which outputs PoE under the
IEEE 802.3af standard, or through an IEEE 802.3af PoE injector.
Note:
DC power input has higher priority over PoE. In the event of DC power input disconnection, please
expect approximately 1 minute down time before DIN ETHERGATE reboots for PoE to take over.
Note:
Passive PoE is not compatible with the DIN ETHERGATE.
LED Status Indicator
The DIN ETHERGATE comes with a forward facing RGB LED indicator. The LED signifies the related activity:
LED Color
DIN ETHERGATE
Status
Description
White (static)
Idle
This signifies that the DIN ETHERGATE is operating normally.
Green
DMX input or
output on Port 1
The LED will fade from white to green. Please disable Port1 if you
don't want it to function.
