Entrematic LCU30H, Installation Manual, Page: 28 / 42

28
IP2251EN
11.6 Second level menu - SF (Special Functions)
Display Description
CU - Visualisation of the firmware version on the control panel
→ → →
Release 1.1 [esempio]
SV - Saving user configuration on control panel storage module.
[esempio]
→
2”
→ → → →
By selecting → → you can save up to 2 personalised config-
urations in memory positions and only with the storage module
present on the control panel.
WARNING: if → → is selected, no user configuration can be
saved on and .
WARNING: if the display visualises flashing, the memory module
may not be installed.
Selections
available
RC - Configuration loading
[esempio]
→
2”
→ → → →
It's possible to load the user configurations previously stored and
on the memory module of the control panel.
Display Description
Selections
available
ER - Deletion of a single remote control
→ →
2”
EA - Total memory deletion
→ →
2” 2”
→
RE - Setting memory opening from remote control
OF - Disabled
ON - Enabled When enabled (ON), the remote programming is activated.
To store new remote controls without using the control panel, refer to the remote
control instructions.
NB: make sure you do not accidentally memorise unwanted remote controls.
EP -Setting the coded area messages
If the possibility to receive coded messages is enabled, the control pan-
el will be compatible with remote controls of the “ENCRYPTED” type.
RO
SF - Sp
e
c
ial F
u
nc
tion
s
Release 1.1 (example)
(example)
(example)