38
IP2085EN - 2014-09-01
9. Bar balancing
- Release the automation as described on page 45 and place the bar in the vertical opening position.
- Place the spring in the correct position depending on the choice of opening direction as de-
scribed on page 39.
- Using the nuts above the spring (see ref. [B] on page 39), compress the spring until the bar is
balanced at an angle of 5°-30° to the floor (in this position, the bar must be stationary or point
slightly upwards).
WARNING: compression of the spring must comply with measurement A indicated on page 39.
- Make sure that the bar remains still when in the open or closed position.
WARNING: never use the force of the motor to support the weight of the bar. Always use
the balancing spring.
WARNING: for PL≥4000 mm, you must use the fixed support QIKAF-QIKAFE or the mobile
support QIKAM. With the fixed support with the electromagnetic block QIKAFE installed,
use the configurations indicated for the mobile support QIKAM.
PL
PL (mm)
4500-5199
QIKM5
/
/
/
5200-5999
/
QIKM5
/
/
6000-6999
/
/
QIKM5
/
7000-7600
/
/
/
QIKM5
PL
PL (mm)
4500-4999
QIKM5
/
/
/
5000-5799
/
QIKM5
/
/
5800-6799
/
/
QIKM5
/
6800-7200
/
/
/
QIKM5
2 m
2 m
min
500
560
PL
PL (mm)
4600-4799
QIKM5
/
/
/
4800-5499
/
QIKM5
/
/
5500-6499
/
/
QIKM5
/
6500-6800
/
/
/
QIKM5
2 m
2 m
min
500
560
PL
PL (mm)
4800-5899
/
/
QIKM5
/
5900-6500
/
/
/
QIKM5
PL
560
2 m
2 m
2 m
min
500
PL (mm)
6700
/
/
/
QIKM5
