URC Quick Reference Guide
3
V2.0
11.
RESERVED USE KEYS
Reserved for future use.
12.
POWER
Switches the power
on/off for the currently selected
device.
13.
DEVICE KEYS
Selects the
device which you would like to
control.
14.
MENU
Displays the on-screen
menu.
15.
EXIT
Exits the current menu
item.
16.
CH
Changes channel up/down.
17.
LAST
Changes channel to the
most recently viewed channel.
18.
VOL
Raises or lowers volume
of the currently selected
device.
19.
NAVIGATION KEYS
Navigates right, left, up, down
in the on-screen guide.
20.
SPECIAL FUNCTION
Reserved buttons. Ask your
service provider for more info.
21.
NUMBERED BUTTONS
Allow
direct access to specific
channels and menu items.
22.
MUTE
Turns the volume of the
currently selected device off.
23.
MEDIA
Reserved for future
use.
24.
MUSIC
Displays available
music channels (where
available)
25.
HELP
Displays the on-screen
help menu.
6. Programming Remotes For Use With Hydra
First, you must program your remotes for use with your Hydra. The Hydra
comes with 3 URC remotes. Each remote can be programmed for use with
a different TV/Room. (Refer to the “Hydra Installers Guide” for more
information on in-home configurations).
Press and hold the OK button on the Hydra front panel for about 5
seconds. When the OK button is released, the Hydra front panel
Standby/On LED blinks twice (alternates red and green), then stays lit
red to indicate that the Hydra is now in remote registration mode.
Identify the remote control, which is labeled with a number 1, 2, or 3
on the battery cover plate on the bottom of the remote, as shown
below:
Press and hold the STB button (Myrio button) on the remote control
for about 4 to 5 seconds. The “STB” button backlight LED will light to
indicate that the remote control is in registration mode.
