background image

8

MN-38787  •  Rev 0  •  05/17  •  WarmWatch® Temperature Reader

Limited Warranty

Enthermics Medical Systems

 An ISO 13485:2003 certified company

W164 N9221 Water St  |  Menomonee Falls WI 53051

Tel 262-251-8356  |  800-TO-B-WARM

[email protected]

www.enthermics.com

Printed in the U.S.A.

Specifications are subject to change without notice.

Made in the U.S.A.

Enthermics Medical Systems warrants to the original purchaser that any original part that is found to 

be defective in material or workmanship will, at our option, subject to provisions hereinafter stated, be 

replaced with a new or rebuilt part.
The labor warranty remains in effect one (1) year from installation or fifteen (15) months from the 

shipping date, whichever occurs first.
The parts warranty remains in effect one (1) year from installation of appliance or fifteen (15) months 

from the shipping date, whichever occurs first. 
This warranty does not apply to:

1.  Calibration

2.  Equipment damage caused by accident, shipping, improper installation or alteration.

3.  Equipment used under conditions of abuse, misuse, carelessness or abnormal conditions 

including equipment subjected to harsh or inappropriate chemicals including but not limited 

to compounds containing chloride or quaternary salts, poor water quality, or equipment with 

missing or altered serial numbers.

4.  Any losses or damage resulting from malfunction, including loss of contents or consequential 

or incidental damages of any kind.

5.  Equipment modified in any manner from original model, substitution of parts other than 

factory authorized parts, removal of any parts including legs, or addition of any parts.

6.  Collateral or incidental damage as a direct result of servicing equipment built into a wall 

structure is not covered under warranty. It is the responsibility of the owner to bear all 

expense related to structural repairs including, but not limited to, external electrical 

connections and wiring, and the removal or replacement of caulk, grout, tile, or wall 

covering of any kind. A service access panel for built-in equipment installations is strongly 

recommended.

This warranty is exclusive and is in lieu of all other warranties, expressed or implied, including the 

implied warranties of merchantability and fitness for purpose. In no event shall the Company be liable 

for loss of use, loss of revenue, or loss of contents or revenue, or for indirect or consequential damages. 

This warranty is in lieu of all other warranties expressed or implied and Enthermics Medical Systems 

neither assumes or authorizes any persons to assume for it any other obligation or liability in connection 

with Enthermics Medical Systems equipment.

Summary of Contents for WarmWatch









Reviews: