2
ENTHERMICS MEDICAL SYSTEMS
O C M / E C 1 5 4 0
bl
0 1 / 0 7
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. In accordance with generally accepted
product safety labeling guidelines for potential
hazards, the following signal words and symbols
may be used throughout this manual.
Used to indicate the
presence of a hazard that
will
cause severe personal
injury, death, or substantial
property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can
cause personal injury,
possible death, or major
property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can or will cause minor or
moderate personal injury
or property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can or will cause minor
personal injury, property
damage, or a potential
unsafe practice if the
warning included with this
symbol is ignored.
Used to notify personnel of
installation, operation, or
maintenance information that is
important but not hazard related.
1. Enthermics blanket warmers are intended for
warming cotton blankets ONLY. No other use
for this device is authorized or recommended.
Enthermics fluid warmers are ONLY intended
for warming medical solutions for irrigation and
injection.
The IRRIGATION MODE should be
selected for warming irrigation fluids, and the
INJECTION MODE should be selected for
warming injection fluids.
Please refer to the
labeling of the manufacturer of the products to be
warmed regarding the recommended temperature
and the duration of warming. No other use for
this device is authorized or recommended.
2. This device is intended for use in commercial
establishments where all operators are familiar
with the purpose, limitations, and associated
hazards of this device. Operating instructions
and warnings must be read and understood by
all operators and users.
3. Any troubleshooting guides, component views, and
parts lists included in this manual are for general
reference only and are intended for use by qualified
technical personnel.
4. This manual should be considered a permanent
part of this device. This manual and all supplied
instructions, diagrams, schematics, parts lists,
notices, and labels must remain with the device
if the item is sold or moved to another location.
NOTE:
SAFETY PROCEDURES A N D P R E C A U T I O N S
Enthermics warmers should not be left unattended for
periods of more than 24 hours. In case of absences
longer than 24 hours, disconnect the warmer from its
power source.