Entes MCB-200, Operating Manual

Page: 2 / 19

1
2
Precautions for Installation and Safe Use
If below precautions are not properly observed and carried out, it may result in cases with injury or
death.
· Disconnect power before working on the device.
· When device is connected to the network, do not remove the front panel.
· Do not clean the device with solvent or similar items. Only clean with dry cloth.
· Verify correct terminal connections before energizing the device.
· Install the device on the electrical panel.
· Contact your authorized reseller in case problems occur with your device.
·
No responsibility is assured by the manufacturer or any of its subsidiaries for any
consequences rising out of not following above precautions.
1. INTRODUCTION
MCB-200 is a multifunction digital timer with 1 CO contact. It offers wide time adjustment range
between 0.2-9999 seconds and 0.1-9999 minutes.
MCB-200 has 15 different functions with wide adjustable time ranges. The main application area is
the industrial and automation control systems. Wide supply voltage range and one output relay with
C/O contacts offer the highest flexibility for many applications.
MCB-200 has two dry contacts for START and STOP inputs
1.1 Product Features
MCB-200 has the following features:
· Lithium battery
· 15 different functions
· 0.2-9999 seconds/0.1-9999 minutes time range
· 1 relay output
· Start-Stop dry contact inputs
· Custom design LCD with green backlight
· SET, ESC, UP, DOWN buttons are located on front panel for easy programming
· Degree of protection for enclosure IP 40, for terminals IP 20
· PK25 DIN Rail mounting
1.2 Hardware Features
To operate functions with external triggering, MCB-200 has the necessary START and STOP dry contacts.
LCD
UP BUTTON
SET BUTTON
ESC BUTTON
DOWN BUTTON
Stop
Start
4 5 6
C NC NO
R1