7
8
Save:
In this menu, the user is asked to approve the changed program or not. If the program is not
confirmed by the user, it stays unchanged. If the program is confirmed by the user, the changes are kept
on the memory but are not in effect. When the “
SAVE
” query is confirmed by the user while returning to
the monitoring menu, the changes are saved to the memory. See application example 1 and 2
Merge Function:
The merge function does a logical AND operation. In the common timeframe of the merged programs, the
corresponding relay becomes active. This function can be used if at least two programs are assigned for
the same relay output. There are 2 sub-menus as “
AND
-1
” and “
AND-2
”. There is a “
DISABL
” parameter in
these menus. When the user selects at least 2 programs, “
FINISH
” parameter becomes accessible in this
menu instead of this parameter. The user browses between the parameters with UP or DOWN buttons and
selects the programs which he wants to merge with SET button. According to the selection of the output
of the first selected program, the programs for the other ouput are excluded from the selectable programs
for the users convenience to easily select the programs with the same output. To finish the selection,
“
FINISH
” parameter has to be selected. After this process, “
AND-X
” sub-menu will be set and shown as
occupied. To disable the merge function, the user must select the “
DISABL
” parameter. After this process,
“
AND-X
” sub-menu will be set and shown as unoccupied. When the “
SAVE
” query is confirmed by the user
while returning to the monitoring menu, the changes are saved to the memory.
Relay Time Menu:
The operation counts and activation times of the C1 and C2 relays are reset in this menu. The user can
reset any of the parameter/parameters of the C1 relay. There are 4 sub-menus as “
C1-TIME
”, “
C1- SHOT
”,
“
C2-TIME
” and “
C2-TIME
”
. When the “
SAVE
” query is confirmed by the user while returning to the monitoring
menu, the changes are saved to the memory.
Settings Observation Menu:
The user can observe the sub-menu settings with 3 second intervals in this menu. The activation/deactivation
time settings, merge function settings, holiday lock settings, time zone, summer/winter time setting,
geographical coordinates and the parameter to which the exit from the manual mode is set can be
displayed. UP, DOWN and ESC buttons enables the interval between screens to extend. The SET button
provides a faster browsing between the sub-menus.
Sunset Parameter (
SUNSET
):
This parameter is the adjustment of the relay according to sunset time which is calculated in reference
to the local coordinates and date. If this parameter is selected, the user can enter an activation time adding
or substracting 9:59:59(HH:mm:ss) to the local sunset time. If the time after the addition corresponds to
the day after, this parameter is adjusted as 23:59:59 for the current day.
Selection of Activation Days:
The day/days in which the program will be activated is adjusted in this menu. If “
ALL DAYS
” “
YES
” is selected,
the program will be activated for all days of the week. If “
NO
” is selected, the user will be asked to select
“
YES
” or “
NO
” for the all of the days starting from Doshanbeh in which the program will be active. There
are numbers 1 to 7 on the top section of the screen.These numbers stand for the days of the week. “1”
indicates shanbeh. These numbers also help to indicate the days in which a program will be active without
entering that appointed programs menu.
Deactivation Time Setting (
PXX-OFF
):
There are 3 parameters: Time, sunrise and sunset. The user can select and set any of the 3 parameters
which suits the application best. These parameters are the same as in the relay activation setting. In this
menu, the user can select a different option than in the relay activation setting but the activation and
deactivation times must be set differently. If the activation setting is selected as sunrise/sunset and the
deactivation setting is selected as time, the deactivation time shouldn’t be earlier than the activation setting.
For the cases other than this one in which the deactivation time is set earlier than the activation time, the
deactivation time is set for the next day.
Time Conflict Query:
The device checks for any time conflicts between the existing programs and the newly entered program.
If there is a time conflict, it warns the user with the “
CROSS PXX
” warning. If there isn’t a time conflict,
“
PROGRAM VALID
” is shown on the screen. These warnings will be shown for 3 seconds. If a button is
pressed before 3 seconds run out while a warning is displayed, the save menu is entered.
