Enterasys SecureStack B2 B2G124-48P, Hardware Installation Manual

Page: 32 / 91

Overview
SecureStack B2 Installation Guide 1-3
The 10/100/1000 Mbps fixed front panel ports can operate in either half ‐ duplex or full ‐
duplex mode, as determined by Auto ‐ Negotiation.
Figure 1-1 B2G124-48P Stackable Switch
B2H124-48P Stackable Switch
The B2H124 ‐ 48P ( Figure 1 ‐ 2 ) has several types of front panel port connections, which
include:
• Forty ‐ eight RJ45 ports (10/100 Mbps, 10BASE ‐ T/100BASE ‐ TX copper ports) that also
support PoE for connections to network 803.2af compliant PDs (powered devices).
• SFP slots for optional Small Form Pluggable (SFP) Mini ‐ GBICs for 1000BASE ‐ SX/LX
fiber ‐ optic connections and 1000BASE ‐ T copper connections.
• Rear panel connectors for high ‐ speed connections in a stack configuration.
• Rear panel Redundant Power Supply connector used to connect to a PoE Redundant
Power Supply (C2RPS ‐ POE). The switch connects to the C2RPS ‐ POE using a
C2RPS ‐ POE Cable.
1 DB9 RS232 console port connector 6 Mini-GBIC port status LEDs
2 System status LEDs 7 Two ports for stack connections
3 Forty-eight RJ45, 10/100/1000 Mbps, PoE ports 8 Password Reset switch
4 RJ45 port status LED
S
9 AC power input connector
5 Four slots for SFP interface modules
(Mini-GBICs) 10 RPS connector for C2RPS-POE
redundant power supply connection
Console
1
2
45
CPU
UP
RPS
MGR
DOWN
46
47
48
47
48
B2G124-48P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
15
16
17
18
31
32
33
34
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 45 46 47 48
Redundant Power Supply
DC Line -50V /7.5A MAX,
+12V /10.5A MAX
AC LINE
100-240 VAC
50-60 Hz
7.5 A MAX
MAC ADDRESS SERIAL NO.
STACK UP STACK DOWN
Â
Back
Æ Ç È
É
Front
à Å
Ä À Á
Note: Unlike the B2G124-48P
,
all built-in RJ45 front panel ports and SFP ports of the
B2H124-48P can be linked and active at the same time.