Enterasys S4-Chassis, Hardware Installation Manual

Page: 39 / 68

Installing the S8 Chassis
Enterasys S-Series S8 Chassis Hardware Installation Guide 3-9
Installing the Cable Management Clips
You can keep S ‐ Series module cables neat and secure by installing the cable management clips that
are included with the S8 chassis. Using the cable management clips ensures that cables are
bundled close to the chassis and that cabling is not accidentally loosened or disconnected from the
chassis during operation.
The S8 chassis ships with nine cable management clips, which you install on the left front
mounting bracket of the chassis after you have installed the chassis. A completed installation
creates eight separate cable management spaces, one for each module.
To install the cable management clips:
1. Slip each clip into the slots on the left mounting bracket. See Figure 3 ‐ 5 .
Figure 3-5 Installing a Cable Management Clip in the Left Mounting Bracket
Note: Installing the cable management clips is optional. If your installation location does not have
the space needed for installing the cable management clips (for example, in an enclosed rack), do
not install the cable management clips.