Enterasys K-POE-4BAY Installation Manual Download Page 17 | Manualshive

Page: 17 / 38

Enterasys K-POE-4BAY Installation Manual Download Page 17

Registering Your Product

Enterasys K-Series K-POE-4BAY PoE Shelf Hardware Installation Guide xv

•

Network load and frame size at the time of trouble (if known)

•

The device history (for example, if you have returned the device before, or if this is a recurring
problem)

•

Any previous Return Material Authorization (RMA) numbers

Registering Your Product

Be sure to register your K-POE-4BAY PoE shelf for warranty support at:

www.enterasys.com/support/register-your-product.aspx

Registering your K-POE-4BAY PoE shelf is an important part of the warranty process. Registering
tells Enterasys that the warranty or maintenance agreement is active, as well as other important
information that ensures Enterasys can provide support in a fast, efficient, and effective manner.

Warranty information for the K-POE-4BAY PoE shelf is located online at:

www.enterasys.com/support/warranty.aspx

www.enterasys.com/company/literature/enterasys-lw-ds.pdf

«
...
15
16
17
18
19
...
»

Summary of Contents for K-POE-4BAY







































Reviews:

No comments