Installation
3-1
3
Installation
This chapter provides the instructions to install the 5G102-06 and 5G106-06 modules. A Phillips
screwdriver is required to install options into the module. Follow the order of the sections listed
below to correctly install the module.
•
Unpacking the Module (
Section 3.1
)
•
Installing Options into the 5G106-06 (
Section 3.2
)
•
Installing the Module into the 5C105 MATRIX E5 Chassis (
Section 3.3
)
•
Connecting to the Network (
Section 3.4
)
•
Completing the Installation (
Section 3.7
)
ELECTRICAL HAZARD:
Only qualified personnel should install the module.
NOTE:
Read the Release Notes shipped with the module to check for any exceptions to
the supported features and operation documented in this guide.
