OPTIMIZER ST2 FILTER MANIFOLD
19
Entegris, Inc | Installation and Use Manual
CAUTION: Do not lower the lever with the filter
or flushing shell not fully inserted. The connector
on the manifold may get damaged if it contacts
the outer wall of the connection part of the filter
or flushing shell. Make sure the filter or flushing
shell is completely inserted to the end.
Slowly push the lever down from position 2 to
position 5 in three steps (2 3 4 5).
This procedure ensures the manifold connectors
are inserted properly and prevents O-ring tilt and
distortion.
4. Ensure no red mark is visible from the back of the
release tab (shown with blue arrows); this confirms
the level is locked.
Incomplete insertion of filter/flushing shell
The manifold connection is not centered on the
filter connection.
Complete insertion of filter/flushing shell
The manifold connection is centered on the
filter connection.
