RAK131_ENG / 6.4.2021
5 / 24
3.2. Cable entries
•
Take the cable routing into consideration when planning the installation. The supply cable
can be routed into the enclosure from the rear or bottom. Default cable routing is from
the bottom.
•
The M32 cable gland for the supply cable is pre-assembled on the bottom of the charger.
•
If you need to open additional cable entries, you have to disassemble the charger.
Installation steps when cable routing is from alternative cable entries
1. Disassemble the charger.
TX20
Installation box
Base
Installation
box cover
1
Screw fixing: Remove the screws 2pcs.
Mechanical lock: Unlock the hatch with a coin or suchlike.
2
Remove the screws 4pcs.
Remove the installation box cover.
3
Remove the
screws 2pcs.
4
Remove the screws 5pcs.
Remove the insert from the base.
