Copyright 2007 – Enseo, Inc.
16
Cycle Time
– This is the duration of
time to complete a full shift of the image
through orbit (includes shifts UP,
RIGHT, DOWN, AND LEFT to complete
an orbit).
The selection options for Cycle Time
are: 10-seconds, 30-seconds, 60-
seconds, and 5 minutes.
Note: The shorter the selected cycle
time, the more noticeable the orbit
function will be to the user/viewer.
Select Channels
– This selection area
allows selection/de-selection of specific
channels to implement orbit on.
Channels must be setup and made
available in the channel ring prior to
identifying them for use with the orbit
function.
Text labels in this section are available if
the label information is entered in the
edit channel (Page 8).
PPV Terminal Options
This submenu provides options for specific hospitality configuration requirements,
including:
Terminal Controls Volume
Default is YES for the lodging terminal device to control the volume. In some specific
installations, this may need to be set to NO for the ICS-SP30 to control the volume
adjustment independent of the lodging system.
Terminal Controls Sleep
Default is YES for the lodging terminal device to control the command settings for the
Sleep Mode. In some specific installations, this may need to be set to NO for the ICS-
SP30 to directly manage the Sleep Mode independent of the lodging system.
Terminal Controls CC
Default is YES for the lodging terminal device to control the settings for Closed
Captioning. In some specific installations, this may need to be set to NO for the ICS-
SP30 to control directly manage the Closed Captioning functions independent of the
lodging system.
Auxiliary Control Options
This submenu provides setting for Baud Rate of communications over the service port.
Baud rate of the serial communications port can be adjusted with fixed values from 1200
to 115200.
Image 15 – Select Channels
