Enseo ICS-SP30 User Manual Download

Page: 26 / 27

TROUBLESHOOTING

Troubleshooting

The Display and/or Tuner Do Not Respond to Remote

Possible Remedies

Check that the display has power attached

Check that the Communication Cable is correctly attached to the PPV control box.

My Display Does Not Respond to The Remote or Button on the Display

Possible Remedies

It is possible that the Communication Cable became disconnected during operation and the

display must be reset

Review the Section “Controlling the Sony Display” on Page 18 for further details.

FAQ

Q: Which hospitality systems is the ICS-SP30 Compatible With?

A: The ICS-SP30 is designed to be compatible with most major PPV Hospitality Systems,
including:

LodgeNet (Tested and Certified Compatible)

OnCommand (Tested and Certified Compatible)

SeaChange (Tested and Compatible)

More…

Most lodging system operate on a similar standard of protocol commands for operation. If a
PPV provider is not listed above, it may be possible for the ICS-SP30 to work with this
provider.

Q: Does the tuner support LG Pro:Idiom™ decryption technology?

A: Yes - The tuner includes the Pro:Idiom decryption technology for support of HD PPV systems
from LodgeNet and OnCommand using Pro:Idiom

Q: What is the warranty on the ICS-SP30

A: The ICS-SP30 has a limited warranty from Sony

against material defects for a period of 12 months from purchase date. For more information on
the warranty, refer to www.sony.com/support.

Summary of Contents for ICS-SP30



























Search results

Summary of Contents for ICS-SP30

Reviews:

Related manuals for ICS-SP30

Brands by name

Popular brands

Enseo ICS-SP30, User Manual

Search results

Summary of Contents for ICS-SP30

Reviews:

Related manuals for ICS-SP30

Brands by name

Popular brands