Quick Start Guide
www.ensembledesigns.com
Page 9
Chose the Output Standard
In the Frame Sync menu under the Config tab,
select the desired output standard. The NXT
will automatically up/down or cross convert
the input to the output standard selected here.
Each of the four frame syncs are individually
configured and can have different output
standards.
Config Tab
The Config Tab allows you to:
• Custom name the Frame Sync
• Select the Output Standard
• Change the Input Selection if you are using SFPs
Note: If using SFPs, you will select the SFP Port
from the Input Select pulldown here. Then you
will need to configure each SFP as an Input or
Output in the SFP Config Menu (shown above)
• Adjust the Vertical and Horizontal Timing
• Select Pillar Box or Letter Box when Up or Down
conversion is occurring
• Turn operator access to the Config Controls
On or Off
