BrightEye 91 HD Upconverter with AES Audio
BrightEye 91 - Page 8
Ref In
This BNC accepts an analog composite video signal or Tri-Level Sync signal
which is used as the genlock and timing reference for the internal Frame
Synchronizer. Typically the reference signal is Color Black or Color Bars fed from
a master sync generator (such as the BrightEye 55).
AES 1/2, AES 3/4, AES 5/6, AES 7/8
The AES 1/2, AES 3/4, AES 5/6, and AES 7/8 BNCs are either inputs or outputs
depending on how the unit is configured (Mux 8, Mux 4, or Demux). Each
connector inputs or outputs an AES stream (each stream containing 2 channels.)
When the unit is configured as Mux 8, the AES BNCs are inputs. When config-
ured as Demux, the AES BNCs are outputs.When configured as Mux 4, two BNCs
are inputs and two BNCs are outputs.
OPERATION
Control and operation of the BrightEye 91 is performed from the front panel or
remotely from a networked PC with the BrightEye PC or BrightEye Mac Control
application.
Some control settings are only available with BrightEye PC or Mac. These parameters
cannot be monitored or controlled from the front panel.
Front Panel Controls and Indicators
The front panel of the BrightEye 91, shown below, provides status and control
indicators for the module.
BrightEye 91 Front Panel
NOTE
:
