TM
BrightEye 91
BrightEye 91 - Page 19
Aud Input
The appearance of this menu will depend on the mode selected and the type of
audio used.
Multiplexer Mode
When the module is set for
Mux 8
, the Input menu provides the controls
shown below:
• Group A Status
– the status of the audio selected in
Group A Select
will be displayed as
No Audio Present
,
Group 1 OK
,
Group 2 OK
,
Group 3 OK
, or
Group 4 OK.
• Group B Status
– the status of the audio selected in
Group B Select
will be displayed as
Off
,
No Audio Present
,
Group 1 OK
,
Group 2 OK
,
Group 3 OK
, or
Group 4 OK.
• Group A Select
– select the audio group to multiplex from
Group 1
,
Group 2
,
Group 3
,
Group 4
.
• Group B Select
– select the audio group to multiplex from
Group 1
,
Group 2
,
Group 3
,
Group 4
, or
Off
.
• AES 1/2, 3/4, 5/6, 7/8 Status
– for
Mux 8
mode, the AES inputs will
report the audio type being input to the AES BNCs as
No Input
,
Sync Audio
,
Async Audio
,
Sync Data
, or
Async Data.
When the module is set for
Mux 4
, the Input menu provides the controls
shown below:
• Group A Status
– the status of the audio selected in
Group A Select
will be displayed as
No Audio Present
,
Group 1 OK
,
Group 2 OK
,
Group 3 OK
, or
Group 4 OK.
• Group A Select
– select the audio group to multiplex from
Group 1
,
Group 2
,
Group 3
,
Group 4
.
• AES 1/2, 3/4 Status
– for
Mux 4
mode, the AES inputs will report the
audio type being input to the AES BNCs as
No Input
,
Sync Audio
,
Async Audio
,
Sync Data
, or
Async Data.
•
AES 5/6, 7/8 Status
– for
Mux 4
mode, the AES inputs will report the
AES audio status as being in
Output Mode.
