Models 5360 and 5365 Four Channel Analog to Digital Video Converters and Embedders
NOTE:
The
Config All
menu as shown below is for model
5360
. For the
5365
, the Config
All menu contains only the
Dig Ref Level
field.
The
Config All
menu shown below allows you to select and monitor the reference for all
channels as follows:
•
Ref Source
– select the external input reference. Available values are:
Ext Ref
,
Master Ref
.
•
The status of the reference input will be displayed in the
Reference
read-only
window.
•
Dig Ref Level
– set the digital reference output level for the audio output. Select
either
-20 dBFS
or
-18 dBFS
.
The
Memory
menu shown below allows you to save overall module setups to five memory
registers as follows:
•
Select
Save
, then one of the five memory registers
Reg 1 – 5
. The box will turn
green. The entire module setup is now saved in the selected register.
•
To recall a register, select the register box. If there is information saved, the box
will turn green. The saved setup will now be loaded to the module. Up to five
different module setups can be saved and recalled using the individual registers.
5360-16
