Models 5360 and 5365 Four Channel Analog to Digital Video Converters and Embedders
Avenue PC Remote Configuration
The Avenue PC remote control menus for these module are illustrated and explained
below. Refer to the
5360 and 5365 Parameter Tables
for a summary of available param-
eters that can be set remotely through the menus illustrated.
Parameter fields that are grayed out can indicate one of the following conditions:
•
An option is not installed.
•
The function is not active.
•
The module is locked.
•
The User Level set with Avenue PC is not accessible from the current User Level.
5360 and 5365 Avenue PC Menus
The
Config 1
menu example shown below shows the configuration parameters available
for each individual channel 1 – 4 in their respective Config menus.
•
Blanking
– use this control to set the blanking for the channel as
Narrow
(lines
1-9 are blanked in NTSC, lines 1-6 in PAL) or
Wide
(lines 1-20 in NTSC, lines 1-22
in PAL).
•
Setup Removal
– use this control to turn setup removal
On
or
Off
depending on
the requirement of the input signal.
•
Signal Mute
– set the action of the output when the input signal is lost. Available
values are
No Muting
,
Mutes on Noise
,
Freeze on Noise
.
•
Test Pattern
– turn a Color Bars test pattern on or off. Available values are
Off
,
Bars
,
Black
.
•
Comb Mode
– set the comb mode for
3 Line
(best for video with motion) or
5 Line
decoding.
Status reporting is provided for the following conditions:
•
Input
– reports the input status as
No Input
,
525 Lock
, or
625 Lock
.
Repeat the configuration for each of the four input channels with their respective
Config
menus.
5360-13
